Using the SOLIDWORKS CAD Admin Dashboard to track, review and troubleshoot machines– Part 2

Welcome to Part 2 of the Using the SOLIDWORKS CAD Admin Dashboard to track, review and troubleshoot machines blog series. In this part we will discuss:

  • Filtering Machine results and grouping
  • Options reported by the dashboard
  • Setting a baseline computer
  • Flagging modified settings

Login to the portal using the steps outlined in Part 1 of the blog series. Click the filter to open the options menu.

SolidWorks

 

Filtering is based on:

  • the last used SOLIDWORKS version
  • Operating System
  • Group
  • Computer Model
  • Graphics Card
  • CPU

Choose the option you wish to sort by and click apply filters.

SolidWorks

 

If you would like to filter by adding groups you can do that by selecting the computers you want by check box and then click the groups button.

SolidWorks

 

Click create new group, and then select the group you would like to add the selected machines too, then OK.

SolidWorks

 

Below are example options settings the system value represents the currently selected machine the baseline is shown for the expected value. A baseline computer is chosen with the actions button. Comments can be added by double clicking the field.

SolidWorks

 

More options:

SolidWorks

 

SolidWorks

 

Here is an example of a machine that has settings that are different than the baseline. You can set flags to report when a machine has settings that don't match the baseline.

SolidWorks

 

These are the flag conditions you can set to report flags.

SolidWorks

 

Here you can see the adjusted flags reporting machines that are out of spec.

SolidWorks

 

Please check back to the CATI Blog as the Dedicated Support Team will continue posting our series of articles that goes further into the details of each section of Using the SOLIDWORKS CAD Admin Dashboard to track, review and troubleshoot machines. All of these articles will be stored in the category of Daily Dose…..of SOLIDWORKS Support and links to each article with their release date are listed below:

John Van Engen, CSWE
Computer Aided Technology, Inc.

 

 

 

  • Share this
Find Your Design Solution in the CATI Store.
Browse Products